Brstjjy

Group GT3, known technically as Cup Grand Touring Cars^[1] and commonly referred to as simply GT3, is a set of regulations maintained by the Fédération Internationale de l'Automobile (FIA) for grand tourer racing cars designed for use in various auto racing series throughout the world. The GT3 category was initially created in 2005 by the SRO Group as a third rung in the ladder of grand touring motorsport, below the Group GT1 and Group GT2 categories which were utilized in the SRO's FIA GT Championship, and launched its own series in 2006, the FIA GT3 European Championship. Since then, Group GT3 has expanded to become the de facto category for many national and international grand touring series, although some series modify the ruleset from the FIA standard. By 2013, nearly 20 automobile manufacturers have built or been represented with GT3 machines.

Group GT3 allows for a wide variety of car types to be homologated with almost no limit on engine sizes and configurations or chassis construction or layout. GT3 cars must be based on production road car models in mass production. Performance of all the Group GT3 cars are regulated, either by the GT Bureau of the FIA or by a series' specific ruling body, through Balance of Performance formulae that adjusts limits on horsepower, weight, engine management, and aerodynamics to prevent a single manufacturer from becoming dominant in the class. The cars in GT3 are designed to have a weight between 1200kg and 1300kg with horsepower between 500hp and 600hp. All cars have a very similar power to weight ratio but achieved either by high power and high weight such as the Mercedes-Benz SLS AMG^[2] or low power and low weight such as the Porsche 911 GT3.^[3] GT3 cars also have traction control, ABS and built in air jacks for quick pit stops.

History

A Dodge Viper Competition Coupe from the debut FIA GT3 European Championship

The concept behind Group GT3 was introduced by Stéphane Ratel, head of the SRO Group and promoter of the FIA GT Championship in 2005.^[4] The Group GT1 and Group GT2 cars in the FIA GT Championship required manufacturers to build a car based on regulations, and then develop that car to increase its performance, thus increasing the cost for the manufacturers and the customers wanting to race the cars. GT3 was envisioned as a category that would simplify the process by combining several existing cars from one-make series, such as the Porsche Supercup or Ferrari Challenge, as well as other race cars available from manufacturers that did not fit in GT1 or GT2, such as the Aston Martin DBRS9 or Dodge Viper Competition Coupe, and allow them to all compete on a level playing field through strict control of their performance by the FIA. This would allow drivers a bridge between smaller national series and the professional international FIA GT Championship.^[5] Further, the category was conceived to use sprint formats for races, but manufacturers could develop and sell an upgrade kit for their cars to allow GT3 cars to be used in endurance races. A similar category, under the same name, had been in use in the British GT Championship which the SRO Group also organized.

The regulations and homologations for Group GT3 were prepared by the FIA and ready by the start of the 2006 season, with eight manufacturers represented as the first Balance of Performance test prior to the debut of the FIA GT3 European Championship.^[6] The British GT Championship, International GT Open, Spanish GT Championship, and Italian GT Championship all created a category specifically for the FIA's new Group GT3 machines. The SRO Group expanded the category in 2007 with the launch of two new regional championships, the Brazilian GT Championship and the German ADAC GT Masters, exclusively running Group GT3 cars. The British GT Championship abandoned Group GT2 cars, promoting GT3 to their premiere category, while the Belcar series reorganized their class structure to introduce GT3 as their lead class. The French FFSA GT Championship also added a new GT3 category.

The Australian GT Championship brought on board the GT3 category in 2008 while the VLN Series and 24 Hours Nürburgring added GT3 categories in 2009. By 2011 Group GT3 was expanding into endurance racing with the formation of the Blancpain Endurance Series as well as winning overall at the Bathurst 12 Hour, Dubai 24 Hour, Malaysia Merdeka Endurance Race, and Spa 24 Hours, followed by a 24 Hours Nürburgring victory in 2012. Group GT3 also expanded to the United States with the Rolex Sports Car Series allowing several GT3 cars with specification wings, as well as the Japanese Super GT and Super Taikyu [ja] series, while Nissan became the first Japanese manufacturer to sell a GT3 car. GT3 category cars also replaced Group GT1 cars in the FIA GT1 World Championship before rebranding as the FIA GT Series in 2013. After NASCAR merged their Grand-Am Rolex Sports Car Series with IMSA's American Le Mans Series, the new United SportsCar Championship allowed more types of GT3 cars to join the GTD category, and in 2016 limited the category to only GT3 spec machines.

On 9 March 2018, it was announced that the FIA World Motor Sport Council approved the introduction of a new process, in which a minimum production number required for GT3 race cars would be enforced. Ten units must be made within twelve months as from the homologation date, twenty units must be made within twenty-four months and so on.^[7]

Homologated cars

An Audi R8 LMS ultra in the Super GT series

An Aston Martin V12 Vantage GT3 in ADAC GT Masters

A BMW Z4 GT3 in the FIA GT1 World Championship

A Nissan GT-R GT3 in the Super Taikyu Series

As of December 2018^[update], 49 cars have been homologated in Group GT3 by the FIA, although four of these homologations have expired.^[8] Other vehicles have been allowed to run alongside Group GT3 cars in various series under homologations from national ruling bodies, including the Mosler MT900R GT3, Ginetta G55 GT3, Chevron GR8 GT3, Radical RXC GT3, Scuderia Cameron Glickenhaus SCG 003, Emil Frey Jaguar XKR G3, Acura TLX-GT and Renault Sport R.S. 01 GT3.

Group GT3 cars can be built either directly by the automotive manufacturer, such as Porsche, Audi, or Mercedes-Benz, or built by racing teams and tuning companies at the behest of the manufacturer, such as Ford GTs built by Matech Concepts, Lamborghinis built by Reiter Engineering, or Aston Martins by Prodrive.

Series

The opening lap of an ADAC GT Masters race

Since 2006, Group GT3 cars have been either exclusive to or in a distinct class in each of the following series:

bold indicates an active series that currently uses Group GT3 cars.

• 24H Series


• ADAC GT Masters


• Asian Le Mans Series


• Australian GT Championship


• Belgian GT Championship


• Blancpain GT Series Asia


• Blancpain GT Series Endurance Cup


• Blancpain GT Series Sprint Cup


• Brazilian GT Championship


• China GT Championship


• British GT Championship


• European Le Mans Series


• FFSA GT Championship


• FIA GT World Cup


• FIA GT1 World Championship


• FIA GT3 European Championship


• GT Asia Series


• Michelin Le Mans Cup


• Intercontinental GT Challenge


• International GTSprint Series


• International GT Open


• Italian GT Championship


• Portuguese GT Championship


• Spanish GT Championship


• Super Taikyu Series


• Veranstaltergemeinschaft Langstreckenpokal Nürburgring


• WeatherTech SportsCar Championship

Additionally, the following series allow certain Group GT3 cars to participate alongside other competitors:

• Britcar


• Dutch Supercar Challenge


• Pirelli World Challenge


• Rolex Sports Car Series


• Super GT


• Swedish GT Series


• V de V Sports Challenge Endurance/GT Tourisme

References

External links

Wikimedia Commons has media related to Group GT3.

• Fédération Internationale de l'Automobile